Weigh out the candle wax and place it into a pouring pot. Heat the wax on a double boiler over low heat until it is completely melted.
Using a hot glue gun, position the candle wick in the center of your candle.
Remove the candle wax from the heat, add fragrance oil, and mix well.
Pour the candle wax about 3/4 of the way and allow it to cool completely.
Print out your design and cut it out.
Once the candle has cooled completely, place the design on the candle.
Pour the remaining candle wax on top of the design, ensuring a slow and close-to-the-container pour.
Use a wooden skewer to move the design back into place if necessary. Allow the candle to cool completely.
Trim the wick to 1/4 inch.